044-001 BALL BEARING
044-001 Ball Bearing for abrasive saw and belt sander ball bearing is used in various ferrous and non-ferrous chop saws and belts sanders. Fits: 12" - 14" saws and 6" sanders.
-
044-006 BEARING SET FOR 10 & 14 INCH MITER SAW (SET OF 2)
044-006 10 and 14 inch mitre saw table bearing set is one of two different bearing sizes that are used to rotate the saw head on the stand. Sold as set of 2.
-
044-007 SEALED BALL BEARING
044-007 Sealed chop saw and belt sander ball bearing is a heavy duty steel sealed bearing is used on various cutoff saws and belt sanders. Works on many models including K10B, KM10, K10AS, K10HS, KM10HS, S6, S612, 2FS'S. -
049-022 14 INCH INDUSTRIAL CUTOFF SAW MOTOR BUSHING
049-022 14 inch industrial cutoff saw motor bushing fixes the motor pulley (560-002) to the motor all 14 inch straight and mitre cutoff saws. -
051-003 ABRASIVE SAW AND WET BELT SANDER V-BELT
051-003 abrasive saw and wet belt sander v-belt is a smooth belt used to drive the 10 inch chop saws and 6 x 48 inch and 4 x 60 inch wet belt sanders. -
051-006 14 INCH INDUSTRIAL CUTOFF SAW V-BELT SET (SET OF 2)
051-006 14 inch industrial cutoff saw v-belt set consist of two v-belts that are used to connect the motor to the spindle. Used on our ferrous and high speed non-ferrous 14 inch saws.
-
051-035 14 INCH CHOP SAW V-BELT TENSIONING TOOL
051-035 14 inch chop saw v-belt tensioning tool is designed to be placed between the motor and spindle pulley to put tension on the belts.
-
053-001 MITRE SAW TOP ECCENTRIC BUSHING WITH BEARING
053-001 mitre saw top eccentric bushing with bearing is used on the 10 and 14 inch industrial mitre saws is used to to rotate the saw head. -
HSM14 High Speed Non Ferrous Saw
The HSM14 high-speed non-ferrous saw delivers fast, accurate saw for cutting aluminum, copper, and other non-ferrous metals—perfect for fabrication shops and production lines demanding clean, burr-free results. -
292-008 LOOSE FLANGE
292-008 10 inch industrial chop saw loose flange is an easy-to-replace replacement aluminum flange with relief. This part is for all dry and wet K10 saws. This part is for all dry and wet K10 saws—features a machined relief for 1.25 inch spindle bushing, 5/8th spindle arbor.
-
342-004 14 inch industrial abrasive saw v-belt guard goes on the straight and mitre abrasive and non-ferrous 14 inch saws. -
342-043 10 INCH ABRASIVE CUTOFF SAW OUTER BELT GUARD
342-043 10 inch abrasive cutoff saw outer belt guard with bracket will fit various 10 inch abrasive straight and mitre cut chop saws. -
381-002 3/4 INCH HANDLE WITH GRIP - FITS 14 INCH ABRASIVE SAW
381-002 The 3/4" handle with grip is manufactured out of steel with a plastic grip and it used on all 14 abrasive saws.
-
381-003 1/2 INCH HANDLE WITH GRIP - FITS 7-10" SAWS
381-003 The 1/2" handle with grip is used to pull the 7 inch, 8 inch and 10 inch ferrous and non-ferrous abrasive saws. -
431-001 VISE FRONT JAW
431-001 industrial abrasive cutoff saw vise front is used on the 10 inch up to 14 inch industrial wet and or dry chop saw vise assemblies. -
431-002 REAR VISE JAW
431-002 Industrial abrasive chop saw rear vise jaw. This is the rear vise jaw is for 10 inch up to 14 inch industrial abrasive cutoff saws. -
486-007 3HP 3PH INDUSTRIAL MOTOR
486-007 3HP 3PH industrial motor is a heavy duty motor used on various industrial abrasive chop saws, sanders and grinders. Motor: 3HP, 3PH, 3450 RPM, 60HZ Voltage & Amp Draw: 220-230V @ 8.4 amps OR 440-460V @ 4.2 amps Motor Weight: 34 lbs *Note: color subject to change. -
560-001 14 INCH INDUSTRIAL CHOP SAW SPINDLE PULLEY
560-001 14 inch industrial chop saw spindle pulley is a two v-belt pulley used on both our ferrous and non-ferrous cutoff saw. -
560-002 14 INCH INDUSTRIAL CUTOFF SAW MOTOR PULLEY
560-002 14 inch industrial cutoff saw motor pulley is used on both the ferrous saws and non-ferrous cutoff saws. -
560-045 INDUSTRIAL METAL CHOP SAW V BELT PULLEY
560-045 industrial metal chop saw v belt pulley is a heavy duty steel pulley used on the 10 inch abrasive wet and dry chop saws. -
562-004 INDUSTRIAL ABRASIVE CHOP SAW TRUNNION PIN
562-004 industrial abrasive chop saw trunnion pin is a steel pin that connects the cutoff saw arm to the chop saw base. -
562-034 14 INCH INDUSTRIAL CUTOFF SAW TRUNNION PIN
562-034 14 inch industrial cutoff saw trunnion pin is a steel pin with slots milled so grease will extended of life of the pin and trunnion. -
701-002HS 14 INCH NON-FERROUS SAW SPINDLE WITH FLANGE
701-002HS 14 inch non-ferrous saw spindle with flange is an all steel spindle and tight flange designed for all 14 inch industrial high speed non-ferrous saws.
-
701-003 10 INCH ABRASIVE SAW SPINDLE AND TIGHT FLANGE
701-003 10 inch abrasive saw spindle and tight flange is an assembly that is designed to go on the the 10 inch abrasive saws and high speed non-ferrous saws. This spindle is available with either a 5/8" and or 1.25" spindle arbor. Optional: 10" cutoff saw spindle assembly.